S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
8.1. General information
8.2. Maintenance and repair
8.2.1. Check and adjustment of angles of installation of wheels
8.2.2. Replacement of the top draft
8.2.3. Replacement of draft of control of a convergence
8.2.4. Removal of the lower lever
8.2.5. Replacement of the rubber plug of the lower lever
8.2.6. Installation of the lower lever
8.2.7. Replacement of the forward rubber plug of the longitudinal lever
8.2.8. Replacement of the longitudinal lever
8.2.9. Replacement of a spring of a back wheel and shock-absorber
8.2.10. Replacement of the stabilizer of cross stability
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




8-2-5-zamena-rezinovojj-vtulki-nizhnego-rychaga.html

8.2.5. Replacement of the rubber plug of the lower lever

Replacement of the plug should be carried out in such order:

Fig. 8.10. Use of the special tool for a plug vypressovka from the lower lever


— insert the special tool 999 5631 (fig. 8.10) into the lower lever over the rubber plug;
— install the special tool 999 5629 under the rubber plug;
— by means of the special tool 999 5630 to a vypressuyta the rubber plug;
— clear the lower lever;

Fig. 8.11. Use of the special tool for a plug press fitting in the lower lever


— insert the special tool 999 5631 (fig. 8.11) into the lower lever;
— install the special tool 999 5629 under the rubber plug;
— install the rubber plug on the lower lever;
— by means of the special tool 999 5630 press the rubber plug in the lower lever.


"previous page
8.2.4. Removal of the lower lever
following page"
8.2.6. Installation of the lower lever