S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
8.1. General information
8.2. Maintenance and repair
8.2.1. Check and adjustment of angles of installation of wheels
8.2.2. Replacement of the top draft
8.2.3. Replacement of draft of control of a convergence
8.2.4. Removal of the lower lever
8.2.5. Replacement of the rubber plug of the lower lever
8.2.6. Installation of the lower lever
8.2.7. Replacement of the forward rubber plug of the longitudinal lever
8.2.8. Replacement of the longitudinal lever
8.2.9. Replacement of a spring of a back wheel and shock-absorber
8.2.10. Replacement of the stabilizer of cross stability
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




8-2-4-snyatie-nizhnego-rychaga.html

8.2.4. Removal of the lower lever

For removal of the lower lever execute the following operations:

Fig. 8.9. Bolts of fastening of the lower lever of a suspension bracket: 1 — a bolt of fastening of the lower lever to a body; 2 — a support; 3 — a bolt of fastening of the shock-absorber; 4 — a bolt of fastening of the lower lever to the longitudinal lever; 5 — a bolt of fastening of a bar of the stabilizer to the lower lever


— mark the provision of an adjusting bolt of 1 (fig. 8.9);
— weaken three assembly bolts (3, 4 and 5) of the lower lever;
— disconnect draft of the stabilizer of cross stability from the lever;
— substitute a support 2 under a body;
— remove a back wheel;
— turn out a bolt 3 fastenings of the shock-absorber and wring out the lower lever down;
— turn out bolts 4, 5 and 1;
— remove the lower lever.


"previous page
8.2.3. Replacement of draft of control of a convergence
following page"
8.2.5. Replacement of the rubber plug of the lower lever