S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
7.1. General information
7.2. Technical characteristics
7.3. Maintenance and repair of a suspension bracket
7.4. Maintenance and repair of steering
7.4.1. Check and elimination of a side play of steering
7.4.2. Check and adjustment of the steering mechanism
7.4.3. Search and elimination of malfunctions in hydraulic system of the amplifier of steering
7.4.4. Replacement of the lock of ignition
7.4.5. Replacement of the lock of a steering column
7.4.6. Replacement of a tip of steering draft with the spherical hinge
7.4.7. Replacement of a protective cover of steering draft
7.4.8. Removal and installation of the module of an inflatable pillow in a steering wheel
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




7-4-7-zamena-zashhitnogo-chekhla-rulevojj-tyagi.html

7.4.7. Replacement of a protective cover of steering draft

For replacement of a protective cover (steering draft):

Fig. 7.33. Steering drive: 1 — a tip of steering draft; 2 — a lock-nut; 3 — steering draft;
4 and 6 — collars; 5 — a protective cover


— remove a tip of 1 (fig. 7.33) of steering draft with the spherical hinge;
— mark the provision of a lock-nut 2 turn off it;
— remove collars 4 and 6 and a protective cover 5 from steering draft;
— remove a lock ring;
— stick a gear segment with a tape;

Fig. 7.34. Removal of steering draft


— clamp two keys a segment and steering draft (fig. 7.34);
— remove steering draft;
— establish a new castle plate;
— establish steering draft by means of two keys, tighten the moment 88 N · m;
— remove a tape from a gear segment; fix steering draft on the place;
— put jellied lubricant 1161001-1 in a protective cover;
— establish a cover into place and fix by new collars;
— screw a lock-nut in former situation;
— establish a tip of steering draft;
— check a convergence of wheels.

"previous page
7.4.6. Replacement of a tip of steering draft with the spherical hinge
following page"
7.4.8. Removal and installation of the module of an inflatable pillow in a steering wheel