S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
7.1. General information
7.2. Technical characteristics
7.3. Maintenance and repair of a suspension bracket
7.4. Maintenance and repair of steering
7.4.1. Check and elimination of a side play of steering
7.4.2. Check and adjustment of the steering mechanism
7.4.3. Search and elimination of malfunctions in hydraulic system of the amplifier of steering
7.4.4. Replacement of the lock of ignition
7.4.5. Replacement of the lock of a steering column
7.4.6. Replacement of a tip of steering draft with the spherical hinge
7.4.7. Replacement of a protective cover of steering draft
7.4.8. Removal and installation of the module of an inflatable pillow in a steering wheel
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




7-4-5-zamena-zamka-rulevojj-kolonki.html

7.4.5. Replacement of the lock of a steering column

For replacement of the lock of a steering column: remove a steering column and establish it
in a vice;
— drill an opening in the cut-off bolts;

Fig. 7.31. Removal of the lock of a steering column


— remove the cut-off bolts by means of the special tool 998 5447 or accurately pour out; remove the case of the lock of a steering column (fig. 7.31);
— put the new lock and its fastening on a steering column;
— tighten two srezny bolts before fixing of a steering wheel on the place;
— put the cylinder;
— check operation of the lock;
— tighten bolts to a cut of their heads;
— establish a steering column.


"previous page
7.4.4. Replacement of the lock of ignition
following page"
7.4.6. Replacement of a tip of steering draft with the spherical hinge