S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
7.1. General information
7.2. Technical characteristics
7.3. Maintenance and repair of a suspension bracket
7.4. Maintenance and repair of steering
7.4.1. Check and elimination of a side play of steering
7.4.2. Check and adjustment of the steering mechanism
7.4.3. Search and elimination of malfunctions in hydraulic system of the amplifier of steering
7.4.4. Replacement of the lock of ignition
7.4.5. Replacement of the lock of a steering column
7.4.6. Replacement of a tip of steering draft with the spherical hinge
7.4.7. Replacement of a protective cover of steering draft
7.4.8. Removal and installation of the module of an inflatable pillow in a steering wheel
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




7-4-4-zamena-zamka-zazhiganiya.html

7.4.4. Replacement of the lock of ignition

For replacement of the lock:
— disconnect a wire from the minus plug of the rechargeable battery;
— establish a steering wheel in the lowermost situation;
— remove the lower cover of a steering wheel;
— turn the ignition key in situation 1;

Fig. 7.30. Otzhatiye a center punch of a stopper of the locking cylinder


— wring out a stopper of the locking cylinder a 2-mm center punch (fig. 7.30);
— remove the ignition lock;
— insert a key into the new lock;
— turn the ignition key in situation 1;
— wring out a stopper a center punch and insert the cylinder into the ignition lock;
— check operation of the lock.

"previous page
7.4.3. Search and elimination of malfunctions in hydraulic system of the amplifier of steering
following page"
7.4.5. Replacement of the lock of a steering column