7-4-2-proverka-i-regulirovka-rulevogo-mekhanizma.html
7.4.2. Check and adjustment of the steering mechanismProcedure for test and adjustments following:
— remove the case of the steering mechanism;
— tighten a nut the moment of 15 N · m; at the same time the steering mechanism has to be in the central family way;
|
Fig. 7.26. Check of a preliminary tightness on the leading gear wheel of the steering mechanism
|
— establish a mandrel 999 5053 on a shaft of the leading gear wheel (fig. 7.26);
— turn a gear segment from an emphasis against the stop several times by means of a dynamometer key 999 8081;
— turn a nut on 30 — 60 °.
— measure a preliminary tightness, it has to be 0,6 — 1,4 N · m; adjust a tightness turn of a nut on 30 — 60 °.
— establish into place a lock plate, tighten a lock-nut;
— install the case of the steering mechanism.
|