S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
7.1. General information
7.2. Technical characteristics
7.3. Maintenance and repair of a suspension bracket
7.4. Maintenance and repair of steering
7.4.1. Check and elimination of a side play of steering
7.4.2. Check and adjustment of the steering mechanism
7.4.3. Search and elimination of malfunctions in hydraulic system of the amplifier of steering
7.4.4. Replacement of the lock of ignition
7.4.5. Replacement of the lock of a steering column
7.4.6. Replacement of a tip of steering draft with the spherical hinge
7.4.7. Replacement of a protective cover of steering draft
7.4.8. Removal and installation of the module of an inflatable pillow in a steering wheel
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




7-4-1-proverka-i-ustranenie-lyufta-rulevogo-upravleniya.html

7.4.1. Check and elimination of a side play of steering

It is necessary to observe the following procedure for test:
— launch the engine and establish wheels in situation for the rectilinear movement, note the provision of a steering wheel (on a rim);
— slowly turning a steering wheel from left to right, note the provision of a steering wheel at the moment when wheels begin to turn;

Fig. 7.24. Places of check of a side play of steering


— if the side play of a steering wheel exceeds 30 mm, check existence of a side play in hinges (fig. 7.24);

Fig. 7.25. Check of a side play of the steering mechanism


— replace if necessary worn-out details; if the side play remains, check a side play of the steering mechanism: establish wheels in situation for the rectilinear movement and switch off the engine; apply to a steering wheel the moment of 5 N · m; the side play of the steering mechanism should not exceed 10 mm (fig. 7.25);
— if the side play of the steering mechanism exceeds 10 mm, check and adjust a preliminary tightness on the leading gear wheel.


"previous page
7.4. Maintenance and repair of steering
following page"
7.4.2. Check and adjustment of the steering mechanism