S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
5.1. General information
5.2. Technical characteristics
5.3. Design, check and replacement of coupling
5.3.1. Conducted and press clutch plates, the release bearing and a fork
5.3.2. Replacement of the main cylinder of coupling
5.4. Filling and pumping of hydraulic system of coupling
5.5. Adjustment of a pedal of coupling
5.6. Replacement of the working cylinder of coupling
5.7. Design and replacement of elements of the transmission
5.8. Gear shifting mechanism
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 







5-3-konstrukciya-proverka-i-zamena-scepleniya.html

5.3. Design, check and replacement of coupling





Fig. 5.1. Adjustment of height of a pedal of coupling


Fig. 5.2. Adjustment of the course of a pedal of coupling (D)


Fig. 5.3. Coupling: 1 — the release bearing; 2 — a spring; 3 —  ; 4 — the conducted disk



Coupling is dry, one-disk. Press a disk with a diaphragm spring 2 (fig. 5.3.). Management of coupling hydromechanical, consisting of a pedal, the main cylinder, connecting cabins and a hose, the working cylinder, the lever of the drive of a fork and the release bearing. The main cylinder of coupling has no tank for brake fluid. It is powered from a tank of the main brake cylinder, and from its top part. It reaches the solution of one of safety problems. If there is a leak in the brake system, at first coupling ceases to work and gear shifting becomes difficult as the conducted disk ceases to be released when pressing a coupling pedal. Therefore during the unsatisfactory work of coupling (difficult inclusion of transfers) troubleshooting should be begun with check of level of brake fluid in a tank of the main brake cylinder. Perhaps, the reason in malfunction of brakes.
All mechanism of coupling and its drive from a pedal to the release bearing do not need service.


"previous page
5.2. Technical characteristics
following page"
5.3.1. Conducted and press clutch plates, the release bearing and a fork