S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
4.1. Removal of a head of the block of cylinders
4.2. Installation of a head of the block of cylinders
4.3. Removal and installation of support of the engine
4.4. Removal of the engine
4.5. Dismantling and assessment of a condition of details of the engine
4.6. Assembly and installation of the engine
4.6.1. Installation of the transmission
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 







4-6-1-ustanovka-korobki-peredach.html

4.6.1. Installation of the transmission

The sequence of actions on the car with the automatic transmission:
1) establish a drive plate and tighten fastening bolts in two steps:
— tighten the moment 45 N · m;
— tighten on 50 °;
2) install the transmission and a starter;
3) install the masloizmeritelny probe and a tube. Fix the hydrotransformer on a drive plate;
4) serially tighten bolts until 50 N · m;
5) install the transmission;
6) tighten bolts the moment of 50 N · m.
The sequence of actions on the car with the mechanical transmission:
1) tighten bolts of fastening of the conducted and press clutch plates until 30 N · m;
2) install the transmission;
3) tighten bolts until 50 N · m;
4) install the engine on the car.

"previous page
4.6. Assembly and installation of the engine
following page"
5. Transmission