2.3.1. Control panel of lighting

Fig. 2.8. Control panel of external lighting

The control panel of lighting has the following elements (fig. 2.8):

1) And — the Handle of management of light of headlights and parking (dimensional) fires.

This handle has the following provisions:

— About — all lighting fixtures are switched off;

NOTE There are complete sets of cars with constantly working passing beam of headlights. When finding the ignition key in situation II they turned on passing beam of headlights (also lobbies and back marker lights and illumination of registration plate are included). Passing beam of headlights is automatically turned on at turn of the ignition key in situation "start-up" and cannot be switched off.

NOTE The distant account of headlights can be included only at this position of the switch of light of headlights.

NOTE If (at a car complete set xenon headlights) because of the low voltage of the accumulator one of headlights did not join, just turn the handle A in situation Oh, and then back in situation

2) In — Adjustment of height of a beam of light of headlights. On some models each headlight is equipped with the electric drive for adjustment of height of a beam of light of headlights at various loading of the car. Height of a bunch changes by means of the regulator "B" located on an instrument guard (see fig. 2.8) and tab. 2.1.

NOTE If the car is equipped with xenon headlights, then adjustment of height of a beam of light of headlights completely automatic.

3) With — Adjustment of illumination of the dashboard. At turn of the regulator up brightness of a suspension bracket increases, down — decreases.

4) D — Back fog lamps. Press the button D. Back fog lamps join together with marker lights and driving/passing beam of headlights (the ignition key has to is in situation II). At the same time the light-emitting diode in the button and the corresponding symbol on the dashboard lights up.

5) Е — Fog lights. Press the button E. Fog lights will join together with marker lights and driving/passing beam of headlights (the ignition key has to is in situation II). At inclusion of fog lights the light-emitting diode located in the button lights up.

NOTE If after extraction of the ignition key from the lock to pull a rychazhok of switching of light of headlights towards a wheel, then passing beam will be turned on for 30 seconds. It can be used for lighting of the road from the car to an entrance door of the house.