S40/V40
1. General information
2. Operation and maintenance of the car
2.1. Governing bodies and dashboard
2.2. Ignition lock
2.3. Management of external lighting
2.4. Windshield screen wipers / washers, screen wipers / washers of headlights
2.5. The warning light (emergency) alarm system
2.6. The warmed back glass, the warmed external rear-view mirrors
2.7. Use of information center
2.8. System of deduction of constant speed of the movement (cruise control)
2.9. DSA system
2.10. Adjustment of provision of a steering wheel
2.11. Parking brake
2.12. Front seats
2.13. A pocket mirror in an antisolar peak
2.14. Internal illumination of salon
2.15. Management of elektrosteklopodyemnik of side glasses of forward doors
2.16. The hatch with the electric drive
2.17. Management of heating and ventilation
2.18. Running in of the new car
2.19. Safety methods when using of catalytic converter
2.20. Launch of the petrol engine
2.21. Blocking of inclusion of a backing
2.22. Automatic transmission
2.23. Brake system
2.24. Service of the rechargeable battery and launch of the engine from a foreign source
2.25. Corrosion-resistant coating of the car and care of it
2.26. General description of electric equipment
2.27. Description of performance of operations on maintenance
2.28. Description of the main operational materials and their filling volumes
2.28.1. Liquid for steering with the hydraulic booster
2.28.2. Liquid for the brake system and a hydraulic actuator of coupling
2.28.3. Liquid for the cooling system
2.28.4. Filling volumes of the main applied operational materials
2.28.5. The operational materials recommended for application
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




2-28-2-zhidkost-dlya-tormoznojj-sistemy-i-gidroprivoda-scepleniya.html

2.28.2. Liquid for the brake system and a hydraulic actuator of coupling
Fig. 2.87. Tanks of the hydraulic booster of steering, brake system and hydraulic actuator of coupling

Liquid for the brake system and a hydraulic actuator of coupling is filled in in the uniform tank located on the main brake cylinder. Level of liquid has to be between tags of MIN and MOVE on the corresponding tank (see fig. 2.87).
The recommended liquid type — the DOT4+ brake fluid, or DOT5 above.
It is regularly necessary to check the level of brake fluid which needs to be replaced time in two years.

       NOTE
When driving with frequent and intensive use of a brake (for example, when driving in mountainous areas) or at operation of the car in tropical climate with high humidity brake fluid should be replaced every year.
"previous page
2.28.1. Liquid for steering with the hydraulic booster		 following page"
2.28.3. Liquid for the cooling system