2.27.8. Replacement of the fuel filter

When replacing the fuel filter act as follows:

1) empty a power supply system for what:

Fig. 2.72. Removal of a cover of the engine

— uncover the engine (fig. 2.72);

— remove a protective cap from the union;

Fig. 2.73. Depletion of a power supply system

— connect the hose/nipple of the tool 999 5484 to the unit for pumping fuels 981 2270, 2273 and 2282 (fig. 2.73);

— turn on the pumping-out pump;

— screw the nipple 999 5484 of the pumping-out pump on the union of a distributive collector.

— be convinced that the valve is open;

— lift the car;

Fig. 2.74. A cover to the left of fuel filter

— uncover to the left of the fuel filter (fig. 2.74);

— remove a cap from the union;

— connect the nipple of the tool 999 5480 to the valve in front of the fuel filter;

— you remember that depletion of system demands about 2 minutes.

2) replace the fuel filter for what:

— disconnect the quick-detachable coupling of the fuel filter, holding a key on 17 mm the case;

— release the collar holding the filter and remove the filter;

— remove the tool 999 5480 and put a cap;

— deliver the new fuel filter and with a force to a napressuyta the quick-detachable coupling (be convinced that it was recorded);

— fix the filter in his holder by means of a collar;

— put a cover;

— lower the car;

— remove the tool 999 5484 and put a cap;

— put an engine cover;

— check existence of leaks.

NOTE Do not forget to put caps on unions.