S40/V40
1. General information
2. Operation and maintenance of the car
2.1. Governing bodies and dashboard
2.2. Ignition lock
2.3. Management of external lighting
2.4. Windshield screen wipers / washers, screen wipers / washers of headlights
2.5. The warning light (emergency) alarm system
2.6. The warmed back glass, the warmed external rear-view mirrors
2.7. Use of information center
2.8. System of deduction of constant speed of the movement (cruise control)
2.9. DSA system
2.10. Adjustment of provision of a steering wheel
2.11. Parking brake
2.12. Front seats
2.13. A pocket mirror in an antisolar peak
2.14. Internal illumination of salon
2.15. Management of elektrosteklopodyemnik of side glasses of forward doors
2.16. The hatch with the electric drive
2.17. Management of heating and ventilation
2.18. Running in of the new car
2.19. Safety methods when using of catalytic converter
2.20. Launch of the petrol engine
2.21. Blocking of inclusion of a backing
2.22. Automatic transmission
2.23. Brake system
2.24. Service of the rechargeable battery and launch of the engine from a foreign source
2.25. Corrosion-resistant coating of the car and care of it
2.26. General description of electric equipment
2.27. Description of performance of operations on maintenance
2.27.1. Check of lack of leak of oil from the engine and the transmission
2.27.2. Check of level of oil in the engine
2.27.3. Check of level of oil in the automatic transmission
2.27.4. Replacement of oil and oil filter
2.27.5. Replacement of the air filter
2.27.6. Replacement of spark plugs
2.27.7. Belts of the gas-distributing mechanism and drive of auxiliary units
2.27.8. Replacement of the fuel filter
2.27.9. Check of a condition of brake and fuel pipelines
2.27.10. Check of a condition of brake shoes
2.27.11. Check and adjustment of the parking brake
2.27.12. Check of work of screen wipers and windscreen washers
2.27.13. Check of a condition of steering and forward suspension bracket
2.27.14. Check of a condition of a back suspension bracket
2.27.15. Check of the selector of the choice of transfer (on cars with the automatic transmission)
2.27.16. Check of technical condition of hinges of equal angular speeds
2.27.17. Check of a condition of tires
2.27.18. Check of system of production of the fulfilled gases
2.27.19. Lubricant of various elements of a body
2.27.20. Service of the sliding antenna
2.27.21. Replacement of the filter of ventilation of salon
2.28. Description of the main operational materials and their filling volumes
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




2-27-10-proverka-sostoyaniya-tormoznykh-kolodok.html

2.27.10. Check of a condition of brake shoes

Fig. 2.75. Removal of front brake shoes


Fig. 2.76. Removal of back brake shoes


When conducting these checks it is necessary to measure thickness of overlays of lobbies and back brake shoes (fig. 2.75 and 2.76) and to compare it to the admissible standard which for forward and back blocks makes 2 mm.
If thickness of overlays of brake shoes is close to the specified value, it is necessary to replace blocks.
Also it is necessary to be convinced of lack of leaks in a support or its connections.
When replacing brake shoes it is necessary to check thickness of brake disks which should not be less minimum admissible value (for forward disks makes 21,5 mm, for back — 8,4 mm).

"previous page
2.27.9. Check of a condition of brake and fuel pipelines
following page"
2.27.11. Check and adjustment of the parking brake