S40/V40
1. General information
2. Operation and maintenance of the car
2.1. Governing bodies and dashboard
2.2. Ignition lock
2.3. Management of external lighting
2.4. Windshield screen wipers / washers, screen wipers / washers of headlights
2.5. The warning light (emergency) alarm system
2.6. The warmed back glass, the warmed external rear-view mirrors
2.7. Use of information center
2.8. System of deduction of constant speed of the movement (cruise control)
2.9. DSA system
2.10. Adjustment of provision of a steering wheel
2.11. Parking brake
2.12. Front seats
2.13. A pocket mirror in an antisolar peak
2.14. Internal illumination of salon
2.15. Management of elektrosteklopodyemnik of side glasses of forward doors
2.16. The hatch with the electric drive
2.17. Management of heating and ventilation
2.18. Running in of the new car
2.19. Safety methods when using of catalytic converter
2.20. Launch of the petrol engine
2.21. Blocking of inclusion of a backing
2.22. Automatic transmission
2.23. Brake system
2.24. Service of the rechargeable battery and launch of the engine from a foreign source
2.25. Corrosion-resistant coating of the car and care of it
2.26. General description of electric equipment
2.27. Description of performance of operations on maintenance
2.27.1. Check of lack of leak of oil from the engine and the transmission
2.27.2. Check of level of oil in the engine
2.27.3. Check of level of oil in the automatic transmission
2.27.4. Replacement of oil and oil filter
2.27.5. Replacement of the air filter
2.27.6. Replacement of spark plugs
2.27.7. Belts of the gas-distributing mechanism and drive of auxiliary units
2.27.8. Replacement of the fuel filter
2.27.9. Check of a condition of brake and fuel pipelines
2.27.10. Check of a condition of brake shoes
2.27.11. Check and adjustment of the parking brake
2.27.12. Check of work of screen wipers and windscreen washers
2.27.13. Check of a condition of steering and forward suspension bracket
2.27.14. Check of a condition of a back suspension bracket
2.27.15. Check of the selector of the choice of transfer (on cars with the automatic transmission)
2.27.16. Check of technical condition of hinges of equal angular speeds
2.27.17. Check of a condition of tires
2.27.18. Check of system of production of the fulfilled gases
2.27.19. Lubricant of various elements of a body
2.27.20. Service of the sliding antenna
2.27.21. Replacement of the filter of ventilation of salon
2.28. Description of the main operational materials and their filling volumes
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




2-27-1-proverka-otsutstviya-utechek-masla-iz-dvigatelya-i-korobki-peredach.html

2.27.1. Check of lack of leak of oil from the engine and the transmission

Verification of leak of oil from the engine and the transmission needs to be carried out as follows:
— be convinced of lack of visible leak of oil and that fuel-supply lines, hoses of cooling liquid, vacuum hoses and hoses of ventilation of a case are tight;
— be convinced of lack of leaks from the engine and the transmission;
— if there is a leak of oil from the transmission, it is necessary to check oil level in the transmission (see соотв. section) and if necessary to add.

       NOTE
The applied oil grade for the transmission, the main transfer — Volvo 3345534-6.

       NOTE
When working on the transmission pay much attention to purity, especially when checking and replacing oil. Clear surfaces of a jellied tube and a drain stopper. Use only pure capacities. Be convinced of lack of dirt and dust in a workplace. Do not allow hit of oil on skin.

Pay at the same time attention to the next moments:
1) whether oil changed the color or it smells of burned? At affirmative answer it is necessary to execute the following checks:
— check whether the onboard diagnostic system registered a malfunction code;
— if the code of malfunction is registered, smell oil;
— find malfunction of the transmission;
— replace oil.
2) whether there is at oil water (oil has gray color)? At affirmative answer it is necessary to execute the following checks:
— define the reason of presence at water oil;
— replace the transmission and wash out the pipeline of the oil heater and oil hoses.


"previous page
2.27. Description of performance of operations on maintenance
following page"
2.27.2. Check of level of oil in the engine