S40/V40
1. General information
2. Operation and maintenance of the car
2.1. Governing bodies and dashboard
2.2. Ignition lock
2.3. Management of external lighting
2.4. Windshield screen wipers / washers, screen wipers / washers of headlights
2.5. The warning light (emergency) alarm system
2.6. The warmed back glass, the warmed external rear-view mirrors
2.7. Use of information center
2.8. System of deduction of constant speed of the movement (cruise control)
2.9. DSA system
2.10. Adjustment of provision of a steering wheel
2.11. Parking brake
2.12. Front seats
2.13. A pocket mirror in an antisolar peak
2.14. Internal illumination of salon
2.15. Management of elektrosteklopodyemnik of side glasses of forward doors
2.16. The hatch with the electric drive
2.17. Management of heating and ventilation
2.18. Running in of the new car
2.19. Safety methods when using of catalytic converter
2.20. Launch of the petrol engine
2.21. Blocking of inclusion of a backing
2.22. Automatic transmission
2.23. Brake system
2.24. Service of the rechargeable battery and launch of the engine from a foreign source
2.25. Corrosion-resistant coating of the car and care of it
2.26. General description of electric equipment
2.27. Description of performance of operations on maintenance
2.28. Description of the main operational materials and their filling volumes
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
12. Schemes of electric equipment
 



13c91ae0




2-20-pusk-benzinovogo-dvigatelya.html

2.20. Launch of the petrol engine

Carry out launch of the petrol engine (model with the mechanical transmission) as follows:
— put the car on the parking brake;
— press a coupling pedal;
— install the transmission lever in neutral situation;
— do not press an accelerator pedal;
— turn the ignition key in the provision of launch of the engine (see соотв. section);
— hold an engine starter included until the engine does not begin to work, however never you hold it included in more than 10 with at each start-up.
For improvement of conditions of start-up to turn a key in situation II and to sustain 1 second to allow the petrol pump to create pressure in the fuel highway. Then to turn a key in the provision of start-up.
Carry out launch of the petrol engine (model with the automatic transmission) as follows:
— check that the handle is in situation P (or N at the cocked parking brake);
— turn the ignition key in the provision of launch of the engine (see соотв. section);
— do not press an accelerator pedal;
— as soon as the engine begins to work, release a key;
— press a pedal of a brake and install the handle of the choice of transfer to required position;
— wait until you feel that the engine begins "to pull", showing inclusion of the chosen transfer then release a brake pedal (and/or the emergency brake) and press an accelerator pedal.
In engines with fuel injection adjustment of the period of a warming up is made by automatically electronic switches therefore the order of start-up remains identical both for cold, and for the warm engine.

"previous page
2.19. Safety methods when using of catalytic converter
following page"
2.21. Blocking of inclusion of a backing