S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
11.1. General information
11.2. Control sizes of a body
11.3. Ways of connection of details at restoration of operational qualities of a body
11.4. Repair of a body
11.5. Removal and installation of elements of a body of the car
11.5.1. Removal and installation of a cowl
11.5.2. Removal and installation of a forward wing
11.5.3. Adjustment of situation and clamp of the lock of doors
11.5.4. Removal of panels of facing of doors
11.5.5. Removal and installation of a door assembled
11.5.6. Removal and installation of the lock of a forward door
11.5.7. Removal and installation of the lock of a back door
11.5.8. Replacement of the mechanism of a window regulator of a forward door
11.5.9. Replacement of the mechanism of a window regulator of a back door
11.5.10. Installation of mechanisms of window regulators
11.5.11. Replacement of a gas-filled emphasis of a trunk lid
11.5.12. Adjustment of provision of a trunk lid
11.5.13. Replacement of elements of the lock of a trunk lid
11.5.14. Replacement of the mechanism of the lock of a trunk lid
11.5.15. Adjustment of the lock of a trunk lid
11.5.16. Replacement of a door of a back
11.5.17. Replacement of the lock of a door of a back
11.5.18. Removal and installation of the mechanism of the lock of a door of a back
11.5.19. Replacement of the block of a back lamp assembled
11.5.20. Replacement of a cover of a filling mouth of the fuel tank
11.5.21. Removal and installation of bumpers
11.5.22. Replacement of a front seat assembled
11.5.23. Replacement of the locking mechanism of a back of a back seat
11.5.24. Replacement of internal facing of a roof
11.5.25. Replacement of a floor covering
11.5.26. Removal of the back central console
11.5.27. Removal of the forward central console
11.5.28. Removal of the dashboard assembled
11.5.29. Replacement of the dashboard
11.5.30. Installation and adjustment of a cable of control of the air mixer
11.5.31. Installation of a combination of devices
12. Schemes of electric equipment
 



13c91ae0




11-5-3-regulirovka-polozheniya-i-fiksatora-zamka-dverejj.html

11.5.3. Adjustment of situation and clamp of the lock of doors

There are following general requirements to adjustment of provision of doors:
— doors have to open and be closed easy;
— edges of doors have to settle down level with external elements of the car;
— all doors are regulated at a clamp of the lock and at loops.
You make adjustment of provision of forward doors as follows:
— weaken both bolts on a side surface of a door;
— adjust the provision of a forward door (max. 1 mm);
— tighten bolts.

Fig. 11.54. Location of fastening of door loops of forward doors


Bolts of fastening of door loops on a body (fig. 11.54) allow to carry out adjustment in wider range. You make such adjustment as follows:
— remove facing from a wing;
— remove foam consolidation;
— to turn off bolts in a body from within a wheel arch;
— adjust the provision of a forward door;
— tighten bolts in a body from within a wheel arch (the moment of an inhaling of bolts of 21 N · м).

Fig. 11.55. Location of fastening of door loops of back doors


Carry out adjustment of provision of back doors (fig. 11.55) as follows:
— weaken four bolts of a rack In and adjust the provision of a door;
— back doors on both sides can also be regulated at loops;
— tighten bolts the moment of 21 N · m.

Fig. 11.56. Adjustment of a clamp of the lock


You make adjustment of a clamp of the lock (fig. 11.56) as follows:
— weaken bolts so that the clamp of the lock could be shifted;
— the door should not lean on a lock clamp, and the clamp of the lock should not wring out a door up;
— holding the handle of delayed, be convinced that the door opens and closed without extraneous noises;
— check reliability of closing of a door and be convinced that it is closed level with a body;
— tighten bolts the moment of 21 N · m.


"previous page
11.5.2. Removal and installation of a forward wing
following page"
11.5.4. Removal of panels of facing of doors