11.5.25. Replacement of a floor covering

Fig. 11.95. Floor covering

You make removal of a floor covering (fig. 11.95) as follows:

— remove both forward sitting (do not forget about protection of the module of the SIPS sensor);

— remove an accelerator pedal emphasis;

— remove the switch of automatic decrease in transfers (kick down);

— remove a back part of the console;

— remove side panels of the console;

— remove back seats;

— remove a forward overlay of a threshold (2 screws self-tapping screws) and a back overlay of a threshold;

— remove the forward side panel;

— remove facing of a rack In;

— remove the dashboard basis panel;

— disconnect lock pins and a fastener "flypaper" in front;

— extend a floor covering from under the forward console.

You make installation upside-down.