S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
11. Body
11.1. General information
11.2. Control sizes of a body
11.3. Ways of connection of details at restoration of operational qualities of a body
11.4. Repair of a body
11.5. Removal and installation of elements of a body of the car
11.5.1. Removal and installation of a cowl
11.5.2. Removal and installation of a forward wing
11.5.3. Adjustment of situation and clamp of the lock of doors
11.5.4. Removal of panels of facing of doors
11.5.5. Removal and installation of a door assembled
11.5.6. Removal and installation of the lock of a forward door
11.5.7. Removal and installation of the lock of a back door
11.5.8. Replacement of the mechanism of a window regulator of a forward door
11.5.9. Replacement of the mechanism of a window regulator of a back door
11.5.10. Installation of mechanisms of window regulators
11.5.11. Replacement of a gas-filled emphasis of a trunk lid
11.5.12. Adjustment of provision of a trunk lid
11.5.13. Replacement of elements of the lock of a trunk lid
11.5.14. Replacement of the mechanism of the lock of a trunk lid
11.5.15. Adjustment of the lock of a trunk lid
11.5.16. Replacement of a door of a back
11.5.17. Replacement of the lock of a door of a back
11.5.18. Removal and installation of the mechanism of the lock of a door of a back
11.5.19. Replacement of the block of a back lamp assembled
11.5.20. Replacement of a cover of a filling mouth of the fuel tank
11.5.21. Removal and installation of bumpers
11.5.22. Replacement of a front seat assembled
11.5.23. Replacement of the locking mechanism of a back of a back seat
11.5.24. Replacement of internal facing of a roof
11.5.25. Replacement of a floor covering
11.5.26. Removal of the back central console
11.5.27. Removal of the forward central console
11.5.28. Removal of the dashboard assembled
11.5.29. Replacement of the dashboard
11.5.30. Installation and adjustment of a cable of control of the air mixer
11.5.31. Installation of a combination of devices
12. Schemes of electric equipment
 



13c91ae0




11-5-1-snyatie-i-ustanovka-kapota.html

11.5.1. Removal and installation of a cowl

You make removal and installation of a cowl as follows:
— establish a prop under a cowl;

Fig. 11.50. Location of elements of fastening of a cowl


— disconnect a windshield washer hose (fig. 11.50);
— remove a lock bracket of a core of an emphasis.
— turn out bolts of fastening of loops;
— establish upside-down (the moment of an inhaling of bolts of 24 N · l);
— adjust a cowl.
You make removal and installation of elements of a cowl as follows:
— remove the noise-insulating panel for what accurately flat screw-driver take the fixing plastic latches;
— remove also windshield washer hoses;
— remove a sealant, 2 pieces for headlights and 1 piece across a cowl;
— remove a front grille;
— put elements on a new cowl;
— put a lattice;
— put windshield washer hoses;
— put the noise-insulating panel;
— put a sealant (use a bilateral adhesive tape).

       NOTES
Surely process a new cowl anticorrosive structure.
Adjust windshield washers.


Fig. 11.51. Adjustment of provision of a cowl


You make adjustment of a cowl (fig. 11.51) as follows:
— longitudinal and cross adjustment (behind): weaken bolts and adjust the provision of a cowl (the moment of an inhaling of bolts of 10 N · l);
— cross adjustment (in front): weaken bolts of fastening of the lock and wring out them sideways against the stop;
— vertical (in front): turn shock-absorbers;

Fig. 11.52. Replacement of a cable of unlocking of the lock of a cowl


You make replacement of a cable of unlocking of a cowl (fig. 11.52) as follows (adjustment is impossible):
— turn out three bolts of fastening of the lock;
— disconnect a cable from the lock;
— remove a wheel arch;
— extend a cable through a wheel arch;
— turn out screws of fastening of the handle of unlocking of a cowl located in salon;
— remove a cable from the handle;
— extend a cable through a wheel arch;
— installation is made upside-down, put on the coupling a new cable (the moment of an inhaling of fixing bolts of 8 N · м).

"previous page
11.5. Removal and installation of elements of a body of the car
following page"
11.5.2. Removal and installation of a forward wing