S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
10.1. Introduction
10.2. Relay
10.3. Safety locks
10.4. Plaits of an electrical wiring and modules of management
10.5. General checks
10.6. Technical characteristics of basic elements of electric network
10.7. Technology of replacement of elements of the electric equipment
10.7.1. Replacement of the generator
10.7.2. Replacement of a starter
10.7.3. Replacement of the sensor of pressure of oil
10.7.4. Replacement of external lighting fixtures
10.7.5. Replacement of lighting fixtures in salon
10.7.6. Replacement of switches of internal lighting
10.7.7. Replacement of a sound signal
10.7.8. Replacement of elements of a screen wiper
10.7.9. Replacement of switches
10.7.10. Removal of system electronic control system of a microclimate (EUM)
10.7.11. Replacement of the lighter
10.7.12. Replacement of blocks of the relay
10.8. Mechanical checks and adjustments
10.9. An arrangement of electric components on the car and schemes of their electric communications
11. Body
12. Schemes of electric equipment
 



13c91ae0




10-7-6-zamena-vyklyuchatelejj-vnutrennego-osveshheniya.html

10.7.6. Replacement of switches of internal lighting

Replacement of door switches
illumination of salon

The sequence of actions when replacing door switches of illumination of salon:

Fig. 10.38. Light switch arrangement in salon


1) unscrew the fixing screw in a rack (fig. 10.38);
2) take out the switch outside and disconnect the socket;
3) collect upside-down;
4) check working capacity.

Replacement of the switch of lighting of the luggage compartment

The sequence of actions when replacing the switch of lighting of the luggage compartment:

Fig. 10.39. Arrangement of the switch of illumination of a luggage carrier


1) remove facing of a door of a back in salon (fig. 10.39);
2) disconnect draft from the lock (press the fixing pin and disconnect draft);
3) turn off three fixing bolts of the lock and remove;
4) disconnect sockets;
5) replace the lock assembled, put draft;
6) collect as it should be, the return to dismantling;


"previous page
10.7.5. Replacement of lighting fixtures in salon
following page"
10.7.7. Replacement of a sound signal