S40/V40
1. General information
2. Operation and maintenance of the car
3. Design and technical characteristics of engines
4. Repair of the engine
5. Transmission
6. Brake system
7. Forward suspension bracket and steering
8. Back suspension bracket
9. Control system of the Fenix 5.1 engine
10. Electric equipment. Conducting and components
10.1. Introduction
10.2. Relay
10.3. Safety locks
10.4. Plaits of an electrical wiring and modules of management
10.5. General checks
10.6. Technical characteristics of basic elements of electric network
10.7. Technology of replacement of elements of the electric equipment
10.7.1. Replacement of the generator
10.7.2. Replacement of a starter
10.7.3. Replacement of the sensor of pressure of oil
10.7.4. Replacement of external lighting fixtures
10.7.5. Replacement of lighting fixtures in salon
10.7.6. Replacement of switches of internal lighting
10.7.7. Replacement of a sound signal
10.7.8. Replacement of elements of a screen wiper
10.7.9. Replacement of switches
10.7.10. Removal of system electronic control system of a microclimate (EUM)
10.7.11. Replacement of the lighter
10.7.12. Replacement of blocks of the relay
10.8. Mechanical checks and adjustments
10.9. An arrangement of electric components on the car and schemes of their electric communications
11. Body
12. Schemes of electric equipment
 



13c91ae0




10-7-5-zamena-osvetitelnykh-priborov-v-salone.html

10.7.5. Replacement of lighting fixtures in salon

General information


Fig. 10.34. Replacement of lamps of lighting fixtures


For replacement of a lamp hook an edge of lenses of lamps a penknife and replace a lamp (fig. 10.34).

Replacement of illumination of the console
on the tunnel

Remove the right panel of the console on the tunnel.
After that remove blocks of illumination of an ashtray and the lever of the selector of the automatic transmission and replace a lamp.

Replacement of illumination of the panel
managements of a heater

The sequence of actions at removal of the panel of a heater:

Fig. 10.35. Removal of the panel of a heater


1) remove handles of management of a heater, hooking the small screw-driver a back part of the handle (fig. 10.35);
2) remove the forward panel (implant fingers into openings and carefully take out the panel).
Lamps are located behind the forward panel.


Lighting replacement
cosmetic mirror


Fig. 10.36. Replacement of a lamp of a cosmetic mirror


Accurately weaken fastening of the lens of a mirror by means of the small screw-driver (fig. 10.36), remove it and replace a lamp.

Replacement of illumination
lighting switch

The sequence of actions when replacing illumination of the switch of lighting:

Fig. 10.37. Replacement of a lamp of the switch of lighting


1) remove the lighting switch (fig. 10.37);
2) remove a cartridge of a lamp, having put forward it outside by means of kruglogubets and replace a lamp.

"previous page
10.7.4. Replacement of external lighting fixtures
following page"
10.7.6. Replacement of switches of internal lighting